Essay/Term paper: Iron
Essay, term paper, research paper: Science Research Papers
Free essays available online are good but they will not follow the guidelines of your particular writing assignment. If you need a custom term paper on Science Research Papers: Iron, you can hire a professional writer here to write you a high quality authentic essay. While free essays can be traced by Turnitin (plagiarism detection program), our custom written essays will pass any plagiarism test. Our writing service will save you time and grade.
Iron
Iron in its pure state is soft, malleable and ductile (that can be
stretched, drawn or hammered thin without breaking ((Webster's Dictionary, 419,
1988)) with a hardness of 4-5. It is easily magnetized at room temperatures and
this property disappears when heated above 790 degrees Celsius.. Metal iron
occurs in a free state in only a few localities, notably Greenland (Encarta,
1996). One of the physical properties of iron as an ore is its color which can
be black, brown or even reddish. Hematite is the most important iron ore,
commonly occurs as "kidney ore" - so -called because of its shape (Symes, 1988,
56). Other ores included goethite, magnetite, siderite, and bog iron (Encarta,
1996). Even though iron is tough and hard it is still easy to work. Iron is a
active metal and will combine with halogens, carbon, etc. It has an atomic
weight 55.847, it's atomic number is 26, it's specific gravity is 7.86, it's
melting point is 1535 degrees Celsius, and it's boiling point is 3000 degrees
Celsius. It burns in oxygen forming ferrous oxide. When exposed to moist air,
iron becomes corroded, forming a reddish - brown, flaky, hydrated ferric oxide,
commonly known as rust. (Encarta, 1996)
Iron is formed in shallow seas. It comes out of the water and collects
on the sea floor. This creates an underwater deposit. This process occurs over
billions of years. Through plate movement the whole sea floor is eventually
moved up out of the water. Once out of the water, the iron has formed a land
deposit. The biggest iron deposit in the United States is in the Great Lakes.
Northern Minnesota is often called the Iron Range. There are two ways iron
deposits are located. In the first method special machines that detects the
iron's magnetism are used ti find a deposit. In the second method a plane with
special equipment flies over an area of land suspected of having ore deposits
and shoots down sound waves to determine if that area contains iron deposit.
The waves come back up to the plane and determined by the pattern one can tell
if there is an iron deposit.
In the early 1990's annual production of iron ore in the United State
exceeded 56 million metric tons (Encarta, 1996). There are two ways in which
iron is mined. The two ways are open pit and shaft mining. Open pit mining is
used 85% of the time for shallow deposits. Open pit mining is also call strip
mining. The way open pit mining works is the top soil is removed with a
bulldozer and the land is terraced downward. Then the miners set off a large
blast which scattereds and loosens the ores. Truckloads of ore are carried to
the surface. As the pit gets deeper and deeper the expense increase and at some
point it is more economical to go to the second method of mining. The second
method in which iron is mined is called shaft mining. Shaft mining is usually
used for deep and concentrated iron deposits. The way shaft mining works is
that a large machine crushes the rock and then conveyor belts are used to
transport it up to the surface.
The definition of refining is to make fine or pure; free from impurities;
dross, alloys, sediment, etc. When they refine iron they alloy it with other
metals. This produces a very common metal known as steel. Steel is very widely
used. It is used from making buildings to making single screws. Though one
might think because steel is made from refined iron the properties would be
similar. This is false. It is the same as gasoline is refined oil. One might
think they are pretty similar but they are very different.
Mining is considered to be extremely detrimental to the environment.
Open pit mining has left a major effect on the surrounding environment. Large
areas of land are literally dug up and large creators are left. The huge holes
disrupt the environment and aren't aesthetic. However, some pits, such as those
on the Mesabi Range in Minnesota have been turned into lakes and this has
created recreational areas for people as well as habitats for birds, fish and
other wild life. The noise of the large machines and the frequent blasts in
mining must scare away much of the animal life. Fumes from dynamite explosions
produce extemely poisonous gases and in mining pockets of hazardous materials
may be released. Dust produced during mining can cause illness, especially lung
disease; black lung disease is associated primarily with coal mining. In shaft
mining, gas can accumulate and explosions can results. Shafts have also
collasped killing workers. Refining of the ore causes dust and fumes to be
released into the environment. In the smelting process to make steel, acidic
clouds are formed from the burning of coal. In the U.S., scrubbers are required
in smoke stacks to prevent acid rain. Through the years, iron and steel have
been used to build our country and provide employment. It's hard to imagine
what life would be like if man had not learned how to mine and manufacture iron.
Mining is now done in a manner to conform more to the environment.
Once the iron ore is mined it is taken to a refinery and purified. Much
of the iron from the Northern Minnesota ranges are loaded on barges at Duluth
and shipped via the Great Lakes to port near Pennsylvania, such as Erie and then
shipped to cities such as Pittsburgh and Bethlehem. Shipping it here is easier
than to ship the coal to make steel as more coal is used than iron in this
process. Pure iron has very limited use. It is used to produce galvanized
sheet metal and electromagnets. Most of the iron used commercially contains
small amounts of carbon and other impurities. This includes wrought iron, cast
iron and steel. Smelting was used to produce early forms of these. Today blast
furnaces that use blasts of air heat the iron with ferroalloys to produce steel.
(Encarta, 1996). The steel is then shaped into screws which are used to hold
the face mask on the shell of the football helmet. Steel is used for this
purpose due to its strength. The physical properties of iron are totally
changed once it has become steel and therefore good to make screws as it will no
longer rust.